When a server has both IPv4 and IPv6, the operating system reaches IPv6-capable sites over IPv6 and everything else over IPv4. If a service such as Google places your IPv4 address in the wrong region, the IPv6 address is often located correctly, so YouTube Premium, Gemini and similar services work normally again. This guide explains why it happens, shows a real test on a Korea server, and walks through enabling and verifying IPv6.
curl installed.Google and similar services do not rely only on IP registration records. They also use their own location data, built from how a range of addresses is actually used. If an IPv4 range is used heavily from other regions, the whole range can be assigned to a different place. This has nothing to do with where your server is or how it is routed: the server stays in the same data center, and its speed and stability do not change.
IPv6 has far more addresses and is handed out in smaller, more specific ranges, so its location data is usually more accurate. The same server reaching a service over IPv6 is usually recognized in its real country.
Tested on 16 November 2026 from a server in IMIDC's Korea data center, once over IPv4 and once over IPv6:
| Service | IPv4 | IPv6 |
|---|---|---|
| YouTube Premium | Region detected incorrectly | Detected as Korea (GL=KR) |
| Google Gemini | Region detected incorrectly | Detected as Korea (KOR) |
| Netflix | Available, full US catalog | Available, full Korea catalog |
| ChatGPT, Claude, Copilot | Available | Available |
| Prime Video, TikTok | Korea region | No IPv6 support yet, IPv4 is used automatically |
Services that support IPv6 are identified correctly over IPv6, and services without IPv6 simply stay on IPv4, so the two complement each other. Full results are in the Korea node AI and streaming unlock report.
Request IPv6 for your server in the control panel (free in the Korea data center). After it is assigned, reboot the server so the new network configuration takes effect.
Run this on the server:
curl -6 -s https://www.cloudflare.com/cdn-cgi/trace | grep -E '^(ip|loc)='
You should see ip= followed by your server's IPv6 address, and loc= followed by the server's country (for example KR). If nothing is printed or you get an error, IPv6 is not working yet; see the FAQ below.
curl -6 -s https://www.youtube.com/premium | grep -o '"INNERTUBE_CONTEXT_GL":"[A-Z]*"'
If the output is "INNERTUBE_CONTEXT_GL":"KR" (your server's country code), Google reaches your server over IPv6 and sees the correct region.
Linux prefers IPv6 by default, so nothing else needs to be set. If you previously edited /etc/gai.conf and added the line precedence ::ffff:0:0/96 100 (which makes IPv4 preferred), comment it out to restore IPv6 preference.
Run ip -6 addr show scope global. If you see two public IPv6 addresses and one is marked dynamic, the system has created an extra address from router advertisements and may use it for outgoing connections. Turn off autoconfiguration on the interface: with netplan, add accept-ra: false under the interface and run netplan apply; on Debian, add accept_ra 0 to the iface eth0 inet6 static section of /etc/network/interfaces and reboot. If it still does not work, open a ticket.
Google judges a region from how a range of addresses is used. Not letting many devices from other regions share the same IP for long periods helps, but nothing can guarantee it. Enabling IPv6 is the simplest fix.
No. The country of your Google account, subscriptions and payment profile is set by the account itself. IPv6 only changes which region your network connection is detected in.
Only services that support IPv6 (for example Google, YouTube and Netflix) use it. Services without IPv6 support yet, such as Prime Video and TikTok, keep using IPv4 automatically.
When an IPv4 address is placed in the wrong region, the cause is usually how that IP range has been used, not your server. Turning on free IPv6 while keeping IPv4 lets IPv6-capable services see your real region and leaves everything else as it was. It is the cheapest and simplest fix. For servers in Korea, see IMIDC Korea cloud servers and Korea dedicated servers.